How to Connect WI-FI Manually (ABB Inverter)

Experiencing Frequent WI-Fi Disconnects? Here might be some reasons why

1) Poor 2.4GHz WI-FI Signal:
2.4GHz Band is prone to interference as many common household items uses it. This interference can
cause the signal to be weaker hence disconnecting your Inverter from WI-FI.

2)Router Wireless Settings:
Check settings of your wireless network. Ensure that the 2.4Ghz Band is enabled and the channel
settings are appropriate. Check if there are settings like client balancing or band steering are enabled as they can cause issues for 2.4GHz Devices. [For wireless mode, it is recommended to select B/G/N on the 2.4GHz Network]

Troubleshooting:
Step 1:
-Connect the ABB Inverter WI-FI to your phone (through settings or scan the QR Code on the left side of the Inverter)
-Go to the browser, enter 192.168.117.1 in Browser. Login with:
Username: Admin
Password: utica（Attention ABB 50kW. ABB 5kW / 6kW Username: utica001 Password: utica001）

Note:
If you need to reset your password, enter the product key shown at the side of the Inverter.

Step 2: Scroll Down, you will see empty boxes, fill up the boxes with your respective home WI-FI.
[Connect to your home WI-FI on your phone, which will lead you to the next step.]

Step 3:
-Fill in your address etc.

Step 4:
-Tick the ‘No Password’ prompt shown below.

Step 5:
-Set Admin Password:
Username: Admin
Password: utica

Step 6:
-If you see this page, that indicates that your connection is successful, you have done the steps correctly.